PX-Sub10A
- 10” long throw, paper cone woofer
- Phase adjustment in 0° / 180°
- 29-200 Hz precise low-frequency reproduction
- Balanced XLR outputs
- Subwoofer level control
- Adjustment of Crossover frequency ranges
- Low frequency extension adjustment
- Build-in 200 W @ 8 Ohms amp module
- Ideal subwoofer system for studio & professional applications
| Name | Spec |
| System | Active subwoofer |
| Bass principle | Bass reflex |
| Frequency reponse | 30Hz to 200Hz |
| Inputs | LFE/Slave: Balanced XLR connector |
| Inputs | SAT/SUB:Right/Left full bandwidth, XLR |
| Input Impedance | + branch: 20K Ohm |
| Input Impedance | - branch: 10K Ohm |
| Sensitivity | 75mV to 5V , adjustable |
| Max. input voltage | 8 V |
| Outputs Slave: | XLR connector |
| Outputs Slave: | SAT/SUB:Right/Left, Highpass filtered, XLR & RCA |
| Output impedance | 100 Ohm (each branch) |
| XLR Connector | Pin 1: 0 / Pin 2 : + / Pin 3 : - |
| Mode selector | LFE & Slave |
| Phase adjustment | 0 / 180 |
| High pass | Flat / 60Hz / 80Hz |
| Low pass | 50 Hz to 150 Hz |
| Power modes | On / Auto |
| Amplifier power | 120W, 4 Ohm |
| Woofer Cone: | 256mm / 10.0", long throw, paper cone |
| Woofer Cone: | Coil: 50mm / 2.0" voice coil |
| Cabinet volume | 29 liters |
| Power Consumption | Standby: <5W |
| Power Consumption | Max:300W |
| Weight | 20 Kg (44.1lbs) |
| Dimensions | 360 x 330 x 450 mm |
| Dimensions | 14.2” x 13.0” x 16.3” |
| Main | 120V, 50/60Hz |
| Main | 220V, 50/60Hz |
